VMP Will Announce Building Information Modeling to the Security Market at ISC West 2013

VMP Will Announce Building Information Modeling to the Security Market at ISC West 2013

  • Apr 03, 2013

VMP Will Announce Building Information Modeling to the Security Market at ISC West 2013Video Mount Products, a provider of mounting solutions for the A/V, communications, and security industries, is proud to announce that they have teamed with Autodesk to provide building information modeling (BIM) content for many of its most popular products. VMP will debut its BIM program to the security market at ISC West 2013, held in Las Vegas, Nev. from April 10-12 at the Sands Expo and Convention Center, booth 1042.

“BIM technology and acceptance has grown significantly over the past several years,” said Keith Fulmer, president of Video Mount Products. “The addition of BIM content to the AutoDesk Seek repository is not just another tool in the toolbox, but a viable solution supporting the architectural, engineering, integrators, and contracting communities in the security market.”

In addition to being hosted on AutoDesk Seek, the content will also be available for download through InfoComm iQ as well as from Video Mount’s website. More than 30 BIM models are currently available for VMP products, including models for flat panel mounts, equipment racks, projector mounts, and non-penetrating roof mounts.

Traditional building design has been largely reliant upon two-dimensional drawings (i.e., plans, elevations, etc.) whereas building information modeling extends beyond 3D to a virtual, 5D platform by enhancing the three primary spatial dimensions (width, height, and depth) with time as the fourth dimension. Cost is the fifth, making the use of BIM a crucial factor for design, implementation, and sustainability with equal importance placed upon manpower and profitability.

“BIM allows all the necessary elements to be integrated into a project during its initial planning stages and flow through to proposed future development before a hammer or nail are used in the project,” Fulmer continued. “By utilizing VMP's BIM models, all the knowledge necessary to make for a successful end-result via the sharing of electronic data between all parties is at the users’ fingertips. This results in more efficient and cost-effective planning and preemptive problem solving in real-time 5D.”

For more information or to access VMP’s BIM models, visit the Video Mount Products website at www.videomount.com.

Need help choosing the correct mount for your application? Try the Video Mount Finder.

Featured

  • Maximizing Your Security Budget This Year

    7 Ways You Can Secure a High-Traffic Commercial Security Gate  

    Your commercial security gate is one of your most powerful tools to keep thieves off your property. Without a security gate, your commercial perimeter security plan is all for nothing. Read Now

  • Digital Access in the Workplace

    It is simple to set up a unified, robust access control solution for one tenant leasing one building. It is even easier if the tenant owns the property. But what is involved when multiple companies lease space in a building? And what about companies that have multiple buildings in the same city or locations across various regions in the country and the world? Read Now

  • Cloud and Hybrid Adoption on the Rise

    The physical security industry is experiencing a time of great transformation. Cloud connectivity is accelerating, and more organizations are choosing to blend on-premises and cloud-based solutions. This transformation is affecting all aspects of security, including access control. In the Genetec annual State of Physical Security Survey, it was access control that topped the list of new technologies end-users planned to focus on in 2024. Read Now

  • Texas City Replaces Locks on Intelligent Traffic Cabinets With More Secure Option

    The Transportation Services and Mobility department for the city of Grand Prairie, Texas recently completed a substantial project to replace the locks on their Intelligent Traffic Cabinets with a better and more secure choice. Turns out what they needed was only a few miles away with ALCEA’s Traffic Cabinet Locking Solution powered by ABLOY technology. Read Now

Most   Popular

Featured Cybersecurity

Webinars

New Products

  • FEP GameChanger

    FEP GameChanger

    Paige Datacom Solutions Introduces Important and Innovative Cabling Products GameChanger Cable, a proven and patented solution that significantly exceeds the reach of traditional category cable will now have a FEP/FEP construction. 3

  • Camden CM-221 Series Switches

    Camden CM-221 Series Switches

    Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings. 3

  • A8V MIND

    A8V MIND

    Hexagon’s Geosystems presents a portable version of its Accur8vision detection system. A rugged all-in-one solution, the A8V MIND (Mobile Intrusion Detection) is designed to provide flexible protection of critical outdoor infrastructure and objects. Hexagon’s Accur8vision is a volumetric detection system that employs LiDAR technology to safeguard entire areas. Whenever it detects movement in a specified zone, it automatically differentiates a threat from a nonthreat, and immediately notifies security staff if necessary. Person detection is carried out within a radius of 80 meters from this device. Connected remotely via a portable computer device, it enables remote surveillance and does not depend on security staff patrolling the area. 3