IRONCLAD Provides Solar Farms with Complete Perimeter Security Solution

As RBtec Perimeter Security Systems marks nearly 30 years of designing, manufacturing and providing advanced perimeter intrusion detection systems (PIDS), the company is proud to announce yet another successful partnership: a full-service, renewable energy company that develops and operates solar energy stations on commercial, not-for-profit and public client sites (buildings/land) across the USA.

Recently this energy company won the tender for building and operating 7 solar farms across New England.

IRONCLAD Provides Solar Farms across New England Complete Perimeter Security SolutionIt looked for a company that can provide effective perimeter security systems for its solar farms. The company sought for a solution that will prevent strangers from entering the restricted areas, thus obstructing criminals such as copper thieves or saving innocent from high voltage danger.

The energy company’s chosen security contractor approached RBtec asking for a PIDS solution with 3 main concerns on their mind: the solution needs to be easy, reliable and affordable but not at the cost of quality. RBtec’s IRONCALD perimeter protection kit was the perfect solution.

The IRONCLAD is an armored passive vibration cable fully wrapped by steel mesh. It is specifically designed for outdoor installation such as chain link fence, welded mesh fence and razor coil or concertina coil. The IRONCLAD comes in a ready for installation kits, no training or special tools needed. The sensor cable can be adjusted to the required length of detection zone: it comes in spools of 250ft (75m), 500ft (150m) and 1000ft (300m). Each Analyzer can control up to 2 zones which means the largest perimeter that can be covered with 1 kit is 2000ft (600m). In order to cover larger perimeter the IRONCLAD kits can be combined as many as needed.

The IRONCLAD detects intrusion by algorithm analysis of typical vibration frequency made by a forced entry attempt. There are 11 levels of sensitivity per zone that can be adjusted to costumer’s request. Furthermore, the system can recognize intrusion attempts while ignoring signals caused by weather conditions. These three layers of alarm filtration (detection algorithm, sensitivity setting & weather compensation) make the IRONCLAD a highly reliable system, such that produces extreme low false alarms.

Due to its easy installation, low maintenance and the simplicity of the IRONCLAD, the pricing of the sensor cable is affordable. The client can secure his entire perimeter in a tight budget without compromising on quality. More so, RBtec grants a 2-year warranty on sensor cable.

RBtec was able to carry out another requirement when the IRONCLAD was integrated to CCTV system provided by the main contractor. Therefore, the reliable IRONCLAD was enhanced with remote long-distance monitored cameras.

Featured

New Products

  • PE80 Series

    PE80 Series by SARGENT / ED4000/PED5000 Series by Corbin Russwin

    ASSA ABLOY, a global leader in access solutions, has announced the launch of two next generation exit devices from long-standing leaders in the premium exit device market: the PE80 Series by SARGENT and the PED4000/PED5000 Series by Corbin Russwin. These new exit devices boast industry-first features that are specifically designed to provide enhanced safety, security and convenience, setting new standards for exit solutions. The SARGENT PE80 and Corbin Russwin PED4000/PED5000 Series exit devices are engineered to meet the ever-evolving needs of modern buildings. Featuring the high strength, security and durability that ASSA ABLOY is known for, the new exit devices deliver several innovative, industry-first features in addition to elegant design finishes for every opening.

  • Camden CV-7600 High Security Card Readers

    Camden CV-7600 High Security Card Readers

    Camden Door Controls has relaunched its CV-7600 card readers in response to growing market demand for a more secure alternative to standard proximity credentials that can be easily cloned. CV-7600 readers support MIFARE DESFire EV1 & EV2 encryption technology credentials, making them virtually clone-proof and highly secure.

  • Camden CM-221 Series Switches

    Camden CM-221 Series Switches

    Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings.