Elementary Schools in Winston-Salem, N.C., Install Security Cameras in Every Classroom

Elementary Schools in Winston-Salem, N.C., Install Security Cameras in Every Classroom

Elementary Schools in Winston-Salem, N.C., Install Security Cameras in Every ClassroomElementary schools in the one Winston-Salem, N.C., county will go back in session with added safety measures, according to a report. The students in Winston-Salem/Forsyth County Schools (WSFCS) will now have sophisticated camera systems in each of their classrooms.

The cameras are in 43 schools and cover as much ground as possible, showing everything going on in the main parts of the schools.

“We have them at the front entrance, the main office, several corridors and the playground,” said Meadowlark Elementary principal Neil Raymer in the story. “All of the cameras are constantly recording, and you can go back several days with data.”

In another effort to improve security, GPS trackers have been installed on all buses. These trackers let school officials know where each bus is on the route and what their estimated ETAs are.

These changes come in the wake of the Sandy Hook shootings. Although those shootings took place nearly two years ago, school systems all over the country are looking for ways to improve security and prevent any crimes from being committed on school grounds.

About the Author

Matt Holden is an Associate Content Editor for 1105 Media, Inc. He received his MFA and BA in journalism from Ball State University in Muncie, Indiana. He currently writes and edits for Occupational Health & Safety magazine, and Security Today.

Featured

Featured Cybersecurity

Webinars

New Products

  • Camden CM-221 Series Switches

    Camden CM-221 Series Switches

    Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings. 3

  • A8V MIND

    A8V MIND

    Hexagon’s Geosystems presents a portable version of its Accur8vision detection system. A rugged all-in-one solution, the A8V MIND (Mobile Intrusion Detection) is designed to provide flexible protection of critical outdoor infrastructure and objects. Hexagon’s Accur8vision is a volumetric detection system that employs LiDAR technology to safeguard entire areas. Whenever it detects movement in a specified zone, it automatically differentiates a threat from a nonthreat, and immediately notifies security staff if necessary. Person detection is carried out within a radius of 80 meters from this device. Connected remotely via a portable computer device, it enables remote surveillance and does not depend on security staff patrolling the area. 3

  • Compact IP Video Intercom

    Viking’s X-205 Series of intercoms provide HD IP video and two-way voice communication - all wrapped up in an attractive compact chassis. 3