Delta Vehicle Access Control Systems Integral to Meeting CIP-014

Delta Scientific announced that Delta vehicle access control systems are being implemented at dams, nuclear power plants and other power generation sites, distribution centers and sub-stations because they meet the stringent standards recently set under the National Infrastructure Protection Plan for the energy subsector. The plan was instituted by the North American Electronic Reliability Corporation with backing by the Federal Energy Regulatory Commission.

"Known as CIP-014, the Critical Infrastructure Protection Reliability Standard 014 is being studied, budgeted and implemented by major utilities to bolster physical security improvement at the perimeter and their openings," reported Greg Hamm, Delta Scientific vice-president, marketing and sales. "We are increasingly working with power utilities to provide vehicle attack defense from terrorists with our cable fencing, retractable barriers, barricades and bollards, fixed bollards, crash-proof gates and ultra-secure sally ports."

Realizing that a vehicle can go through a chain link fence like a hot knife through soft butter, many utilities are securing their outer perimeters with Delta's cable fencing, which consists of two ¾-inch diameter steel cables suspended from line posts spaced at 10-foot intervals. Such cable systems stop a 4,000-pound vehicle traveling at 52 miles per hour. Each pipe extends 44 inches above ground and is embedded 40 inches deep in a 10-inch diameter concrete footing. The cable ends are fastened to concrete deadmen casts in the ground every 100 feet. Cables are placed at 30 inches and 35 inches above the ground. Such fences keep errant vehicles some distance from the facility itself.

The same retractable Delta barriers, barricades and bollards that protect over 17,000 of the world's most important facilities around the globe are also being used at generation and distribution entrances. Kept in an upright position, they lower only to allow passage of authorized vehicles, acting as the first line of defense at critical locales. There are a wide variety of models, all crash certified, that can stop up to a 65,000 pound vehicle traveling at 50 miles per hour, approximately 5.4 million foot-pounds of energy.

One barricade, the DSC7500 swing beam, was created especially for the United States Department of the Interior's Bureau of Reclamation to protect the nation's water diversion, delivery, storage and hydroelectric generation projects. The DSC7500 swing beam barricade closes off one or two lanes of a roadway and provides counter terrorist level protection against vehicle attack. The DSC7500 is supplied as an easy to use manual gate or powered with full automation features. Sliding gates are also available in several forms, including tracked and cantilevered, that carry ratings up to ASTM M50.

With Delta DSC600 fixed bollard modules, energy companies can safely protect facilities surrounded by streets, abutting sidewalks and set back on lawns. With a foundation only 14 inches deep, the fixed bollards can be installed on sidewalks, atop concrete deck truss bridges or in planters as well as conform to the inclines and turns of the locale.

Utilities also use Delta crash-proof gates to stop unauthorized pedestrians and vehicles from entering places that they don't belong. Some models slide without contact with the ground across the opening. Others are swing version. Clear openings range from 12-30 feet with a standard height of 109 inches. They can withstand impacts as high as a 15,000 pound vehicle striking at 50 miles per hour, suffering no significant damage.

"We look forward to helping electrical power organizations meet the parameters of CIP-014," added Hamm. "From some of America's most famous dams to 85 percent of the nation's nuclear power plants, we're very experienced in dealing with power generation and distribution organizations."

Featured

  • 66 Percent of Cybersecurity Pros Say Job Stress is Growing

    Sixty-six percent of cybersecurity professionals say their role is more stressful now than it was five years ago, according to the newly released 2024 State of Cybersecurity survey report from ISACA, a global professional association advancing trust in technology. Read Now

  • Live from GSX 2024: Post-Show Recap

    Another great edition of GSX is in the books! We’d like to thank our great partners for this years event, NAPCO, LVT, Eagle Eye Networks and Hirsch, for working with us and allowing us to highlight some of the great solutions the companies were showcasing during the crowded show. Read Now

    • Industry Events
    • GSX
  • Research: Cybersecurity Success Hinges on Full Organizational Support

    Cybersecurity is the top technology priority for the vast majority of organizations, but moving from aspiration to reality requires a top-to-bottom commitment that many companies have yet to make, according to new research released today by CompTIA, the nonprofit association for the technology industry and workforce. Read Now

  • Live from GSX 2024: Day 3 Recap

    And GSX 2024 in Orlando, is officially in the books! I’d like to extend a hearty congratulations and a sincere thank-you to our partners in this year’s Live From program—NAPCO, Eagle Eye Networks, Hirsch, and LVT. Even though the show’s over, keep an eye on our GSX 2024 Live landing page for continued news and developments related to this year’s vast array of exhibitors and products. And if you’d like to learn more about our Live From program, please drop us a line—we’d love to work with you in Las Vegas at ISC West 2025. Read Now

    • Industry Events
    • GSX

Featured Cybersecurity

Webinars

New Products

  • Automatic Systems V07

    Automatic Systems V07

    Automatic Systems, an industry-leading manufacturer of pedestrian and vehicle secure entrance control access systems, is pleased to announce the release of its groundbreaking V07 software. The V07 software update is designed specifically to address cybersecurity concerns and will ensure the integrity and confidentiality of Automatic Systems applications. With the new V07 software, updates will be delivered by means of an encrypted file. 3

  • Mobile Safe Shield

    Mobile Safe Shield

    SafeWood Designs, Inc., a manufacturer of patented bullet resistant products, is excited to announce the launch of the Mobile Safe Shield. The Mobile Safe Shield is a moveable bullet resistant shield that provides protection in the event of an assailant and supplies cover in the event of an active shooter. With a heavy-duty steel frame, quality castor wheels, and bullet resistant core, the Mobile Safe Shield is a perfect addition to any guard station, security desks, courthouses, police stations, schools, office spaces and more. The Mobile Safe Shield is incredibly customizable. Bullet resistant materials are available in UL 752 Levels 1 through 8 and include glass, white board, tack board, veneer, and plastic laminate. Flexibility in bullet resistant materials allows for the Mobile Safe Shield to blend more with current interior décor for a seamless design aesthetic. Optional custom paint colors are also available for the steel frame. 3

  • Camden CM-221 Series Switches

    Camden CM-221 Series Switches

    Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings. 3