Holding an Open Door

Putting a stop to propped doors

A top tier university serving more than 40,000 students needed a cost effective way to improve the level of security at its non-card access controlled doors. It is common practice throughout the campus to have card reader access control at the main entrance of the facilities, but the side and back doors are often not included as part of this system. The school did not want to limit egress through these doors, but did want to make sure that they stayed secured and locked when not in use. It was not uncommon to find these unmonitored doors propped open as students would use the side doors as shortcuts, providing an opportunity for unwanted intruders to just walk in and take advantage of the situation.

A Policy Change

After trying multiple options including new policy statements and putting up signs on the doors to deter door propping, the university decided that some form of device would be needed to make sure that the doors stayed closed and locked from the outside. The director of security and his staff started out with a homemade design using discreet components such as timer modules, relays and sounders to make various configurations of door alarms for the non-card access controlled doors.

While in low volumes this was acceptable, it quickly became a nuisance and was not cost effective for the installers to put together the different configurations of door alarms that were needed for the various entry and exit applications.

After producing several different custom built products and looking at commercially available produced options, they standardized on the Designed Security, Inc. ES4200 Door Management Alarms.

The versatility of the ES4200 proved to be just the product for use on the various doors throughout a variety of campus facilities. The university first used the Door Prop Alarms at the residence halls where they had issues of propped exit doors. Typically these doors exited to the parking areas or side yards and were used by the students as a shortcut.

“We did not want to fully stop people from using the doors to exit, but wanted to ensure the door would be closed and not remain propped open.” said the director of security. “We used the ES4200- K1-T0 and set the timer so that it allowed students to exit using the emergency exits, and if the door was not closed it would give a local alarm after a preset period of time, typically 10 seconds.”

A Remote Alarm

If the local alarm was not responded to in a reasonable period of time, a remote alarm signal could be sent back to the security desk and someone would be dispatched to make sure the door was secure. The availability of a key switch on the unit also allowed university staff local control to override or shunt the device for events or building maintenance.

Once the usefulness and versatility of the product was tested and proven on the dormitory doors, the university found other applications for the device. For emergency exit doors the ES4200 could be configured as an exit alarm that would alarm immediately if a security door was opened from the inside or outside of the building.

The product also fit well into library locations where doors must be secured and monitored at all times. Units installed in the library triggered an immediate alarm, which was sent to a local display panel and through an interface with the access control system, pulled up a video camera image of the door in question.

With the installation of the door management alarm, this university found a versatile, cost effective, easy to install product that they could standardize on for many of their door monitoring and alarming applications. With its field selectable timing and input/output options that can be used stand alone or in conjunction with the existing access control system, the system met all of the requirements. The university now has a way to monitor and manage non-access controlled doors throughout the campus, and by doing so has improved the security and safety of their students, faculty and their property.

This article originally appeared in the April 2016 issue of Security Today.

About the Author

Mark Crandall is the operations manager and vice president at Designed Security, Inc.

Featured

  • Pragmatism, Productivity, and the Push for Accountability in 2025-2026

    Every year, the security industry debates whether artificial intelligence is a disruption, an enabler, or a distraction. By 2025, that conversation matured, where AI became a working dimension in physical identity and access management (PIAM) programs. Observations from 2025 highlight this turning point in AI’s role in access control and define how security leaders are being distinguished based on how they apply it. Read Now

  • Report: Cyber Attackers Continue to Turn to AI-Based Tools to Avoid Detection

    Comcast Business recently released its 2025 Cybersecurity Threat Report, a comprehensive analysis of 34.6 billion cybersecurity events detected between June 1,2024 and May 31, 2025. Now in its third year, the report offers business leaders a unique perspective into the evolving threat landscape and provides actionable insights to help organizations strengthen their defenses and align cybersecurity with business risk. Read Now

  • Axis Communications Creates AI-powered Video Surveillance Orchestra

    What if cameras could not only see the world, but interpret it—and respond like orchestra musicians reading sheet music: instantly, precisely, and in perfect harmony? That’s what global network technology leader Axis Communications set to find out. Read Now

  • Just as Expected

    GSX produced a wonderful tradeshow earlier this week. Monday was surprisingly strong in the morning, and the afternoon wasn’t bad at all. That’s Monday’s results and asking attendees to travel on Sunday. Just a quick hint, no one wants to give up their weekend to travel and set up an exhibit booth. I’m just saying. Read Now

    • Industry Events
    • GSX
  • NOLA: The Crescent City

    Twenty years later we finds ourselves in New Orleans. Twenty years ago the aftermath of Hurricane Katrina forced exhibitors and attendees to look elsewhere for tradeshow floor space. Read Now

    • Industry Events
    • GSX

New Products

  • Automatic Systems V07

    Automatic Systems V07

    Automatic Systems, an industry-leading manufacturer of pedestrian and vehicle secure entrance control access systems, is pleased to announce the release of its groundbreaking V07 software. The V07 software update is designed specifically to address cybersecurity concerns and will ensure the integrity and confidentiality of Automatic Systems applications. With the new V07 software, updates will be delivered by means of an encrypted file.

  • ResponderLink

    ResponderLink

    Shooter Detection Systems (SDS), an Alarm.com company and a global leader in gunshot detection solutions, has introduced ResponderLink, a groundbreaking new 911 notification service for gunshot events. ResponderLink completes the circle from detection to 911 notification to first responder awareness, giving law enforcement enhanced situational intelligence they urgently need to save lives. Integrating SDS’s proven gunshot detection system with Noonlight’s SendPolice platform, ResponderLink is the first solution to automatically deliver real-time gunshot detection data to 911 call centers and first responders. When shots are detected, the 911 dispatching center, also known as the Public Safety Answering Point or PSAP, is contacted based on the gunfire location, enabling faster initiation of life-saving emergency protocols.

  • Camden CM-221 Series Switches

    Camden CM-221 Series Switches

    Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings.