Cubs to Install Security Cameras around Wrigley Field

Cubs to Install Security Cameras around Wrigley Field

The Cubs plan to spend $1 million on security cameras near Wrigley Field.

The Chicago Cubs have announced their intent to send the city $1 million to pay for dozens of cameras to be installed around Wrigley Field.

According to the Chicago Tribune, the City Council Budget Committee approved the grant from the team to the city’s office of Emergency Management and Communications, but it could be months before the new cameras are up and running.

"This was the first step in getting these new cameras in place, and it's just another step in the increased attention to the area around the park," Wrigley Field Ald. Tom Tunney, 44th, said. "It's a new day, obviously. There has been a greater security presence around Wrigley Field than I've seen in my 15 years as alderman. The team is financing this part of it as part of their commitment to making Wrigleyville a safer place, and I support it."

The team and city will work together to decide on placement of the cameras, which will cost around $30,000 apiece to buy and install. The video gathered from the new cameras will become part of the OEMC’s citywide network of security cameras.

Tunney said the great majority of the 30 or so additional cameras will be located in the “nexus of Wrigley Field” close to the ballpark, but some will be installed as far as Kennedy Expressway and Lake Shore Drive, which thousands of fans use to get to the games.

The announcement for the security cameras comes days after a suicide bomber detonated a bomb inside Manchester Arena following an Ariana Grande show. Committee Chairman Ald. Carrie Austin said the need for the added security in high-profile public areas is self-evident.

Featured

Featured Cybersecurity

Webinars

New Products

  • Camden CM-221 Series Switches

    Camden CM-221 Series Switches

    Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings. 3

  • A8V MIND

    A8V MIND

    Hexagon’s Geosystems presents a portable version of its Accur8vision detection system. A rugged all-in-one solution, the A8V MIND (Mobile Intrusion Detection) is designed to provide flexible protection of critical outdoor infrastructure and objects. Hexagon’s Accur8vision is a volumetric detection system that employs LiDAR technology to safeguard entire areas. Whenever it detects movement in a specified zone, it automatically differentiates a threat from a nonthreat, and immediately notifies security staff if necessary. Person detection is carried out within a radius of 80 meters from this device. Connected remotely via a portable computer device, it enables remote surveillance and does not depend on security staff patrolling the area. 3

  • Compact IP Video Intercom

    Viking’s X-205 Series of intercoms provide HD IP video and two-way voice communication - all wrapped up in an attractive compact chassis. 3