Comparing Wireless Communication Protocols

  • By Andrew Jimenez
  • Sep 01, 2018

Wi-Fi is a technology based on the IEEE 802.11 suite of standards that uses radio frequencies (RF) extend wired Ethernet-based local area networks (LAN) to Wi-Fi-enabled devices, allowing the devices to receive and send information from the internet.

How does it work? Wi-Fi uses Internet Protocol (IP) to communicate between endpoint devices and the LAN. A Wi-Fi connection is established using a wireless router that is connected to the network and allows devices to access the internet.

One disadvantage of Wi-Fi is that it may be prone to interference depending on the RF environment it’s operating in. Everything from other Wi-Fi signals to radio waves emitted by microwave ovens to cement walls can interfere with your data transmission. That’s where Wi-Fi’s two frequencies, 2.4GHz and 5GHz, come in. Wi-Fi can broadcast on both frequencies, helping its signal cut through all the noise and deliver a fast, strong signal from your wireless router to your device.

What applications is it best for? LAN video, e-mail, and web applications requiring higher data rate network connections (1Mbps-1Gbps).

Li-Fi

What is it? Li-Fi is a form of visual light communication that sees light waves from LED bulbs for high-speed wireless communication. It is used to exchange data quickly and securely at a much lower power level compared to Wi-Fi.

How does it work? When a constant current source is applied to an LED bulb, it emits a constant stream of photons observed as visible light. When this current is varied slowly, the bulb dims up and down. Since the bulbs are semiconductors, the current and optical output can be modulated at extremely high speeds that can be detected by a photodetector device and converted back to electrical current.

Li-Fi has fewer interference issues than RF technology, making it ideal for dense environments where Wi-Fi may fall short. It can’t penetrate solid materials, which makes it more secure, but also means a Li-Fi network in a building would need multiple transmitter bulbs, so a mobile user could experience seamless wireless coverage as they move between the illumination area of each LED bulb.

What applications is it best for? Li-Fi is still a long way from widespread commercialization, but it has potential applications for the Internet of Things in many industries, including aerospace, education, consumer electronics, healthcare, retail, security and transportation.

Bluetooth

What is it? A standard for the short-range wireless interconnection of mobile phones, computers and other electronic devices.

How does it work? Bluetooth sends and receives radio waves in a band of 79 different frequencies (channels) centered on 2.45 GHz, set apart from radio, television and cellphones, and reserved for use by industrial, scientific and medical gadgets.

Bluetooth’s short-range transmitters have very low power consumption and are more secure than wireless networks that operate over longer ranges, such as Wi-Fi.

What applications is it best for? Bluetooth is a global 2.4 GHz personal area network for short-range wireless communication.

Device-to-device file transfers, mobile credentials, wireless speakers and wireless headsets are often enabled with Bluetooth.

ZigBee

What is it? ZigBee is a 2.4 GHz mesh local area network (LAN) protocol. It was developed as an IEEE 802.15.4-based specification for a suite of high-level communication protocols used to create personal area networks with small, low-power digital radios.

How does it work? ZigBee devices transmit data over long distances by passing it through a mesh network of intermediate devices to reach more distant ones. ZigBee networks have a defined rate of 250 MBps and are secured by 128-bit symmetric encryption keys.

What applications is it best for? ZigBee is typically used in lowdata- rate applications that require high scalability, long battery life, and secure networking. It is simpler and less expensive than Bluetooth or Wi-Fi and is commonly used for home, building and industrial automation applications, such as controlled lighting and thermostats, home energy monitors, smart metering, medical device data collection, traffic management systems and other low-power, low-bandwidth needs.

This article originally appeared in the September 2018 issue of Security Today.

About the Author

Andrew Jimenez is the vice president of technology at Anixter.

Featured

  • Empowering and Securing a Mobile Workforce

    What happens when technology lets you work anywhere – but exposes you to security threats everywhere? This is the reality of modern work. No longer tethered to desks, work happens everywhere – in the office, from home, on the road, and in countless locations in between. Read Now

  • TSA Introduces New $45 Fee Option for Travelers Without REAL ID Starting February 1

    The Transportation Security Administration (TSA) announced today that it will refer all passengers who do not present an acceptable form of ID and still want to fly an option to pay a $45 fee to use a modernized alternative identity verification system, TSA Confirm.ID, to establish identity at security checkpoints beginning on February 1, 2026. Read Now

  • The Evolution of IP Camera Intelligence

    As the 30th anniversary of the IP camera approaches in 2026, it is worth reflecting on how far we have come. The first network camera, launched in 1996, delivered one frame every 17 seconds—not impressive by today’s standards, but groundbreaking at the time. It did something that no analog system could: transmit video over a standard IP network. Read Now

  • From Surveillance to Intelligence

    Years ago, it would have been significantly more expensive to run an analytic like that — requiring a custom-built solution with burdensome infrastructure demands — but modern edge devices have made it accessible to everyone. It also saves time, which is a critical factor if a missing child is involved. Video compression technology has played a critical role as well. Over the years, significant advancements have been made in video coding standards — including H.263, MPEG formats, and H.264—alongside compression optimization technologies developed by IP video manufacturers to improve efficiency without sacrificing quality. The open-source AV1 codec developed by the Alliance for Open Media—a consortium including Google, Netflix, Microsoft, Amazon and others — is already the preferred decoder for cloud-based applications, and is quickly becoming the standard for video compression of all types. Read Now

  • Cost: Reactive vs. Proactive Security

    Security breaches often happen despite the availability of tools to prevent them. To combat this problem, the industry is shifting from reactive correction to proactive protection. This article will examine why so many security leaders have realized they must “lead before the breach” – not after. Read Now

Most   Popular

New Products

  • FEP GameChanger

    FEP GameChanger

    Paige Datacom Solutions Introduces Important and Innovative Cabling Products GameChanger Cable, a proven and patented solution that significantly exceeds the reach of traditional category cable will now have a FEP/FEP construction.

  • PE80 Series

    PE80 Series by SARGENT / ED4000/PED5000 Series by Corbin Russwin

    ASSA ABLOY, a global leader in access solutions, has announced the launch of two next generation exit devices from long-standing leaders in the premium exit device market: the PE80 Series by SARGENT and the PED4000/PED5000 Series by Corbin Russwin. These new exit devices boast industry-first features that are specifically designed to provide enhanced safety, security and convenience, setting new standards for exit solutions. The SARGENT PE80 and Corbin Russwin PED4000/PED5000 Series exit devices are engineered to meet the ever-evolving needs of modern buildings. Featuring the high strength, security and durability that ASSA ABLOY is known for, the new exit devices deliver several innovative, industry-first features in addition to elegant design finishes for every opening.

  • 4K Video Decoder

    3xLOGIC’s VH-DECODER-4K is perfect for use in organizations of all sizes in diverse vertical sectors such as retail, leisure and hospitality, education and commercial premises.