Tips: Secure Vacant Buildings

As property vacancies continue to rise across the U.S. due to a weakening economy, Fireman's Fund Insurance Co. is providing commercial property owners with important tips to help reduce their liability and risk.

"Vacant buildings are frequent targets for arson and vandalism, therefore it's important for building owners to be vigilant about monitoring and securing them," said David Cohen, senior director of real estate, commercial insurance at Fireman's Fund. "With rising vacancy rates and a weak economy, there are increased risks for vacant real estate. Property owners can adopt best practices to reduce their risk."

Outlined below is a checklist for vacant buildings to help mitigate potential liability exposures:

  • Keep sprinkler systems in operation. Conduct weekly recorded inspections of sprinkler control valves, fire extinguishers, and other fire protection equipment. Test all fire protection system alarms quarterly to ensure they are still operative.
  • Strengthen security to prevent arson and vandalism. Notify both the police and fire departments that the building will be idle, and retain a central station to monitor water-flow and security alarms. Increase watch service, increase exterior lighting, and provide additional locks for gates, doors and windows. Make frequent and unscheduled rounds.
  • Avoid freeze-ups. Operate boilers to provide heat and/or steam to prevent freezing of fire protection equipment (water supply tanks, sprinklers, sprinkler piping, etc). Convert sprinkler systems to dry-pipe systems if building heat is not provided or convert to nonfreeze systems for small unheated areas.
  • A minimum of one recorded visit per week to inspect all areas of the building should be made. The visit should include checks of general conditions, to ensure that important buildings are secured, and to ensure that all fire protection and detection systems are maintained in working order.
  • Remove unnecessary combustibles. Eliminate fire hazards within buildings by removing as many combustibles as possible. Remove any debris or other combustible items within 25 feet of any building. Keep grass cut short, ideally three inches or less.
  • Mitigate exposures from hazardous operations, in particular those involving flammable liquids, and turn off electrical equipment. Secure any utilities that aren't going to be kept in service. Make sure flammable liquid tanks are drained and secured (by removing them or filling them with sand or concrete).
  • Review insurance policy. It's important to notify your insurance company and review the policy to ensure compliance with a vacant property.

Featured

New Products

  • Connect ONE’s powerful cloud-hosted management platform provides the means to tailor lockdowns and emergency mass notifications throughout a facility – while simultaneously alerting occupants to hazards or next steps, like evacuation.

    Connect ONE®

    Connect ONE’s powerful cloud-hosted management platform provides the means to tailor lockdowns and emergency mass notifications throughout a facility – while simultaneously alerting occupants to hazards or next steps, like evacuation.

  • A8V MIND

    A8V MIND

    Hexagon’s Geosystems presents a portable version of its Accur8vision detection system. A rugged all-in-one solution, the A8V MIND (Mobile Intrusion Detection) is designed to provide flexible protection of critical outdoor infrastructure and objects. Hexagon’s Accur8vision is a volumetric detection system that employs LiDAR technology to safeguard entire areas. Whenever it detects movement in a specified zone, it automatically differentiates a threat from a nonthreat, and immediately notifies security staff if necessary. Person detection is carried out within a radius of 80 meters from this device. Connected remotely via a portable computer device, it enables remote surveillance and does not depend on security staff patrolling the area.

  • Camden CV-7600 High Security Card Readers

    Camden CV-7600 High Security Card Readers

    Camden Door Controls has relaunched its CV-7600 card readers in response to growing market demand for a more secure alternative to standard proximity credentials that can be easily cloned. CV-7600 readers support MIFARE DESFire EV1 & EV2 encryption technology credentials, making them virtually clone-proof and highly secure.