Are Contractors Ready for DOD’s Cybersecurity Framework?

Are Contractors Ready for DOD’s Cybersecurity Framework?

The cybersecurity maturity model certification could have a profound impact on the procurement landscape when it goes live next year

Contractors will face big changes and tight timelines next year when the Defense Department institutes its new Cyber Maturity Model Certification framework. Announced by DOD officials in June, the framework seeks to certify companies’ compliance with federal cybersecurity regulations for controlled unclassified information (CUI). It will be used to evaluate and rate contractors’ ability to protect sensitive data on a scale of 1 to 5.

The initial version of the framework is scheduled to go public in January 2020. By June, its requirements will start appearing in requests for information, and it will become a regular feature of defense procurement by September. That means defense contractors will have less than eight months to implement the necessary changes to ensure that they comply with the Defense Federal Acquisition Regulation Supplement’s and the National Institute of Standards and Technology’s guidance on protecting CUI.

“Any timeline would seem ambitious. One that looks to have this in operation by 2020 [is] going to be difficult,” said Robert Metzger, a lawyer specializing in government contracts and commercial litigation and a consultant who focuses on supply chain security issues. “Naturally, industry has a lot of questions about the mechanics… Companies are understandably uncertain as to how these changes will affect what they’re doing, how they will demonstrate eligibility for contracts and what the costs might be upon their operations.”

Cybersecurity is Not Free

High costs, confusing guidance and low return on investment have all been cited as reasons for compliance challenges among defense contractors. Traditionally, DOD has declined to cover the costs associated with implementing acquisition regulations related to CUI cybersecurity, but that has slowly changed over the past 12 months as military contractors have faced unprecedented attacks from foreignsponsored hackers.

Last year, then-Deputy Secretary of Defense Patrick Shanah expressed reluctance on the part of DOD to help contractors cover added costs for cybersecurity, saying it should be a baseline expectation in contracts.

However, at a Professional Services Council event, Katie Arrington, special assistant to the assistant secretary for defense for acquisition for cyber, announced that the department would allow contractors to write off a portion of their cybersecurity spending for government contracts, including implementing NIST guidance.

Alan Chvotkin, executive vice president and counsel at the Professional Services Council, welcomed the shift, stating that it would be contradictory for DOD to refuse to provide financial incentives for cybersecurity while it is also expressing a desire to expand the number of businesses that make up the defense industrial base.

“To be a smart businessman, let alone a contractor, you ought to undertake this [level of security] because our adversaries are stealing everything,” Chvotkin said. “On the other hand, [DOD] is trying to entice nontraditional companies and small companies that otherwise … might not see the need to incur such significant costs to reach the level that is expected as a contractor or subcontractor.”

Still, it’s not clear how DID’s reimbursement policy will work, which contracts it would apply to or what percentage of a company’s costs would be covered.

A Shake-up of the Contracting Community

James Goepel, CEO and general counsel at cybersecurity consulting firm Fathom Cyber, told FCW he has serious doubts that many defense contractors will be ready by September 2020. For most companies, the associated costs are less about assets and technology and more about training employees and allocating personnel to map and formalize internal IT policies. The potential for an initial shock to the federal contracting system is real.

“I do think that it’s going to hurt us in the short term from a product-availability perspective,” said Goepel, who also teaches cybersecurity at Drexel University’s law and business schools. “The government is going to miss out on stuff, and there are going to be companies that go out of business because of this. But in the end, I think that it may actually be a better thing for country unfortunately.”

Metzger doesn’t go that far but believes a short-term effect could be the departure of some companies from the federal contracting space. The impact might be hardest on small and medium-sized businesses that have fewer financial resources and have typically avoided the level of scrutiny directed toward large prime contractors.

“I think the short-term impact is that companies of all sizes are going to be looking at affordable effective ways to improve their cybersecurity,” he said. “Nobody knows exactly today what you will need to do to get a security rates score of [1 to 5] ... I’m thinking that many companies will be targeting their investments and actions to be sure that when it comes into place they will get at least a 3.”

This article originally appeared in the October 2019 issue of Security Today.

Featured

  • Maximizing Your Security Budget This Year

    Perimeter Security Standards for Multi-Site Businesses

    When you run or own a business that has multiple locations, it is important to set clear perimeter security standards. By doing this, it allows you to assess and mitigate any potential threats or risks at each site or location efficiently and effectively. Read Now

  • New Research Shows a Continuing Increase in Ransomware Victims

    GuidePoint Security recently announced the release of GuidePoint Research and Intelligence Team’s (GRIT) Q1 2024 Ransomware Report. In addition to revealing a nearly 20% year-over-year increase in the number of ransomware victims, the GRIT Q1 2024 Ransomware Report observes major shifts in the behavioral patterns of ransomware groups following law enforcement activity – including the continued targeting of previously “off-limits” organizations and industries, such as emergency hospitals. Read Now

  • OpenAI's GPT-4 Is Capable of Autonomously Exploiting Zero-Day Vulnerabilities

    According to a new study from four computer scientists at the University of Illinois Urbana-Champaign, OpenAI’s paid chatbot, GPT-4, is capable of autonomously exploiting zero-day vulnerabilities without any human assistance. Read Now

  • Getting in Someone’s Face

    There was a time, not so long ago, when the tradeshow industry must have thought COVID-19 might wipe out face-to-face meetings. It sure seemed that way about three years ago. Read Now

    • Industry Events
    • ISC West

Featured Cybersecurity

Webinars

New Products

  • A8V MIND

    A8V MIND

    Hexagon’s Geosystems presents a portable version of its Accur8vision detection system. A rugged all-in-one solution, the A8V MIND (Mobile Intrusion Detection) is designed to provide flexible protection of critical outdoor infrastructure and objects. Hexagon’s Accur8vision is a volumetric detection system that employs LiDAR technology to safeguard entire areas. Whenever it detects movement in a specified zone, it automatically differentiates a threat from a nonthreat, and immediately notifies security staff if necessary. Person detection is carried out within a radius of 80 meters from this device. Connected remotely via a portable computer device, it enables remote surveillance and does not depend on security staff patrolling the area. 3

  • PE80 Series

    PE80 Series by SARGENT / ED4000/PED5000 Series by Corbin Russwin

    ASSA ABLOY, a global leader in access solutions, has announced the launch of two next generation exit devices from long-standing leaders in the premium exit device market: the PE80 Series by SARGENT and the PED4000/PED5000 Series by Corbin Russwin. These new exit devices boast industry-first features that are specifically designed to provide enhanced safety, security and convenience, setting new standards for exit solutions. The SARGENT PE80 and Corbin Russwin PED4000/PED5000 Series exit devices are engineered to meet the ever-evolving needs of modern buildings. Featuring the high strength, security and durability that ASSA ABLOY is known for, the new exit devices deliver several innovative, industry-first features in addition to elegant design finishes for every opening. 3

  • Camden CM-221 Series Switches

    Camden CM-221 Series Switches

    Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings. 3