TSA to Notify Travelers of Upcoming 2018 REAL ID Airport Enforcement

The Transportation Security Administration (TSA) will begin posting signs at airports this week notifying travelers that beginning January 2018 it will start enforcing REAL ID requirements at airport security checkpoints, meaning that travelers seeking to use their state-issued driver’s license or identification cardfor boarding commercial aircraft may only use such documents if they are issued by a REAL ID compliant state or a non-compliant state with an extension.

 

TSA’s notification follows Secretary of Homeland Security Jeh Johnson’s announcement earlier this year of the final phase of implementation of the REAL ID Act.  Effective January 22, 2018, TSA will only accept state-issued driver’s licenses or identification cards if they are issued by a REAL ID compliant state or a non-compliant state with an extension.  As always, travelers may use alternate forms of identification such as a passport, military ID, or permanent resident card.A complete list of identification documents accepted at TSA checkpoints is available on tsa.gov.

 

The REAL ID Act, passed by Congress in 2005, establishes the minimum security standards for state-issued driver’s licenses and identification cards and prohibits federal agencies, like TSA, from accepting licenses and identification cards for certain official purposes, including boarding federally regulated commercial aircraft, from states that do not meet these minimum standards and have not received an extension for compliance from DHS.

 

DHS continues to work with states to encourage compliance and may grant extensions or determine compliance for additional states as warranted. TSA will update signage if and when states that are currently listed receive extensions. Learn more about REAL ID, check the status of your state’s complianceor read the frequently asked questions.

Featured

New Products

  • Camden CM-221 Series Switches

    Camden CM-221 Series Switches

    Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings.

  • HD2055 Modular Barricade

    Delta Scientific’s electric HD2055 modular shallow foundation barricade is tested to ASTM M50/P1 with negative penetration from the vehicle upon impact. With a shallow foundation of only 24 inches, the HD2055 can be installed without worrying about buried power lines and other below grade obstructions. The modular make-up of the barrier also allows you to cover wider roadways by adding additional modules to the system. The HD2055 boasts an Emergency Fast Operation of 1.5 seconds giving the guard ample time to deploy under a high threat situation.

  • Automatic Systems V07

    Automatic Systems V07

    Automatic Systems, an industry-leading manufacturer of pedestrian and vehicle secure entrance control access systems, is pleased to announce the release of its groundbreaking V07 software. The V07 software update is designed specifically to address cybersecurity concerns and will ensure the integrity and confidentiality of Automatic Systems applications. With the new V07 software, updates will be delivered by means of an encrypted file.